SHOWROOM FIVE · SITE v1 · BUILD GUIDE

KEYSMITH
The key is forged, not given.

IRON #0B0A09 · EMBER #FF5C1F · WHITE-HOT #FFF3E4 · BRICOLAGE GROTESQUE / SPACE GROTESK / IBM PLEX MONO

The brief

A blacksmith’s atelier at night. The hero is a key being cut in live sparks; each of the six offers is a commission on the bench. Single continuous scroll; each commission card heats (ember glow ramps) as it nears the viewport’s center. Mood: industrial craft, heat, patience. All copy verbatim from the shared copy pack — no invented numbers, and the two offers without launch numbers carry their honest status stamped on a job tag instead.

Signature technique — cooling-ramp spark physics

A canvas-2D particle system emits sparks from the key’s bit (the emit point is derived from the DOM-measured SVG frame, never an assumed aspect ratio). Each spark carries gravity, drag, a bench-line bounce, and a cooling color ramp — white-hot to amber to ember to dying red — keyed to its remaining life. Cursor proximity fans the embers (a radial wind force plus a raised emission rate), and the sim is pre-warmed 240 steps so the very first painted frame is already mid-shower. Every frame is cleared — no accumulation buffers, so no permanent ghosting.

// cooling ramp: white-hot → amber → ember → dying red (t = life 1 → 0)
function rampColor(t) {
  if (t > 0.75) return 'rgba(255,247,236,';
  if (t > 0.5)  return 'rgba(255,181,102,';
  if (t > 0.28) return 'rgba(255,92,31,';
  if (t > 0.12) return 'rgba(179,48,26,';
  return 'rgba(122,36,26,';
}

// bench bounce — sparks scatter and die on the workbench line
if (p.y > benchY && p.vy > 0) {
  p.y = benchY;
  p.vy *= -0.32;  p.vx *= 0.72;  p.life -= 0.12;
  if (Math.abs(p.vy) < 40) p.life -= 0.3;
}

// PRE-WARM: advance ~4s so the first painted frame is mid-shower
for (var i = 0; i < 240; i++) step(1 / 60);

One easing token set sitewide (--ease-forge: cubic-bezier(.19,1,.22,1)), a 0/.15/.35/.5s entrance stagger, and a single rAF loop drives sparks, per-card heat, and the bench-heat rail so nothing desyncs. Reduced motion gets a static ember glow positioned by the same fractional coordinates, no sim, no entrance animation.

What the three critique passes found

PASS 1 — COMPOSITION AMPUTATED

Found: the key’s bit, cutting point, and most of the spark fan bled off the right edge of the viewport; the grinding-wheel arm read as a glowing glitch slab; the headline rag near-widowed “hold”; three lines of ember competed with the forge glow; “THE BENCH” tag floated mid-air with sparks striking through it; card 03’s honest-status plate collided with its CTA on one line; cards 02+03 ignited simultaneously; mobile cut the key off at the top.

Fixed: pulled the whole key inside the frame, flipped the spark fan down-left across the bench, confined ember to “the key.”, moved the bench tag below the rule, made status plates block-level, tightened the heat falloff to one hottest card, reordered mobile copy-first. Removed one thing: the grinding wheel — the white-hot bite and the sparks tell the story alone.

Upgrade: the BENCH HEAT rail — a fixed ember thermometer in the right margin that fills with scroll progress.

PASS 2 — THE CLIPPED GLOW

Found: the heat-glow circle was clipped by the SVG bounds — a hard rectangular glow edge, glaring on mobile; card 04’s meta wrapped “DONE FOR / YOU” as an orphan; the bench rule was too faint to register.

Fixed: overflow: visible on the key SVG so the glow bleeds naturally; stamps became stacked job-tags; rule color raised one step.

Upgrade: hover feeds the fire — hovering any commission card raises its heat glow floor and flares its № numeral ember.

PASS 3 — THE INVISIBLE HERO

Found: a render-blocking Google Fonts stylesheet stalled on one run and held first paint — the entrance animation clock started ~4s late and the screenshot caught the hero at opacity 0 (the classic FOUC-through-transparent-overlay landmine). Also: the card CTA underline broke awkwardly when wrapping on mobile.

Fixed: fonts load non-render-blocking (media="print" swap + noscript fallback) so the reveal gate can never hold the page hostage; CTAs became display:inline so the ember underline follows both wrapped lines.

Upgrade: an easter egg — pressing F anywhere (or pressing on the key itself) works the bellows: the emission rate surges and the shower flares.

Director’s cold review

Found: the key was an under-lit silhouette (only the spark point carried light) and the upper-right quadrant of the hero was dead air. Fixed: a rim light forged from the work point — a gradient-stroked duplicate of every key path (blurred pass for glow, crisp pass for the hot edge), brightest at the bit and cooling to nothing at the bow, so the iron reads as catching the light of its own cut; plus heat haze — a soft warm bloom rising from the work point and three slow ember motes drifting up into the corner on the same rAF loop.

Provenance

← BACK TO THE FORGE